TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 90-130 g/m2.
Diluent: Water
Method of application: It is applied by roller, brush or spray. For ease of application, it can be diluted with water by no more than 10% of the volume.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 3 hours until completely dry.
Washability: the enamel forms a coating that is resistant to washing with non-abrasive household detergents (Class 1 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Хранение транспортировка: при температуре не ниже 5°С в плотно закрытой таре, предохраняя от воздействия влаги, тепла и прямых солнечных лучей. Допускается однократная транспортировка в зимний период с заморозкой. Разморозить в теплом помещении без механического воздействия. После полной разморозки, перед применением, тщательно перемешать миксером на малых оборотах, контролируя при этом отсутствие осадка.
Срок годности: Гарантийный срок хранения в заводской невскрытой упаковке - 3 года.
Состав: акриловая дисперсия, вода, молотый мрамор, антисептик, ингибитор коррозии, технологические добавки.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, free of grease and free of loose paintwork and rust. The temperature of the surface, rust and air must be at least +8 ° C, and the relative humidity is below 80%.
Preliminary preparation: clean the surface from loose old coatings, dirt, rust, grease and dust.
Coloring: mix thoroughly before use, while controlling the absence of sediment. Apply by roller, brush or spray in two or three layers. Check compatibility with copper pipes by applying it to a hidden section of the pipeline. For guaranteed corrosion protection, ensure uniform coverage (without non-stains and gaps) of the surface with a total consumption of at least 250 g/m2. When calculating paint consumption, the degree of surface roughness and absorbency must be taken into account.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: primer-enamel is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands. Empty containers should be disposed of as household waste. Do not pour the remaining material into sewers and reservoirs.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.