BACK

Enamel-Impregnation for wood

ADD
The composition is intended for coloring old darkened wood and, if desired, changing the color of a new one, further protecting it from all types of atmospheric influences: UV rays, humidity, biological damage by mold fungi (including blue), algae and other microflora.
Creates an opaque, breathable decorative coating that highlights the texture of the wood. Perfectly fills pores and surface defects. Applying the material in two layers ensures high resistance of the wood to precipitation and washing.
Enamel impregnation can be used as a colored primer before varnishing a wooden surface, which significantly increases the strength and durability of the paint layer, reduces varnish consumption by 15-20%. It dries quickly and has no unpleasant odor. Safe for humans and animals.
The composition can also be used for processing mineral and other porous relief surfaces: brick, concrete, cement and gypsum compounds, sandstone, limestone.
The product is recommended for residential and outdoor use.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 100-200 g/m2.
Diluent: Water, no more than 5% of the total paintwork volume.
Method of application: It is applied by roller, brush or spray.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry. The specified level of resistance of the coating to washing is reached after 2 weeks.
Washability: the enamel forms a coating that is resistant to washing with non-abrasive household detergents (Class 1 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use.
Shelf life: The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, antiseptic, defoamer, pigment.

INSTRUCTIONS FOR USE

Painting conditions: the surface to be treated must be dry and clean. The temperature of the surface, the enamel impregnation and the air should be at least +8 ° C, and the relative humidity should be below 80%.
Pre-preparation: clean the substrate to a solid surface before use. It is desirable to remove a layer of loose wood by planing or scalding. Do not apply enamel impregnation for wood on surfaces previously impregnated with oil paints, petroleum-based materials, as well as on wood impregnated with antiseptic materials of unknown composition. This can lead to immediate peeling, rolling of the impregnation, or reduce the claimed service life. If necessary, first test on a small, inconspicuous area of the surface.
Coloring: before use, mix thoroughly with a mixer at low speed, while controlling the absence of sediment. Apply by roller, brush or spray in two or three layers.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the impregnation is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands. Empty containers should be disposed of as household waste. Do not pour the remaining material into sewers and reservoirs.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.