TECHNICAL SPECIFICATIONS
Consumption (per 1 coat): manual application of about 1.7 kg/m2 per 1 mm of thickness.
Drying time: 8-24 hours before further exposure, depending on the thickness of the layer at a temperature of +20 ° C and a relative humidity of 65%. As the temperature decreases, the drying time increases.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
The warranty period of storage is 36 months in the original unopened packaging.
Ingredients: llatex, filler, technological additives, antifungal additives, water.
INSTRUCTIONS FOR USE
Application conditions: the surface to be treated must be dry and clean, the temperature of the surface, composition and air must be at least +2 ° C, and the relative humidity below 80%.
Surface preparation: before use, clean the substrate to a solid surface, dust-free.
Method of application: mix the dry and liquid components thoroughly with a mixer at low speed, until a homogeneous consistency. Depending on the tasks, the solution can be prepared in different consistencies. The amount of liquid component for preparation of mortar for repair purposes, in the form of plaster or for bulk application can vary from 5.6 kg to 6.2 kg.
Cleaning of tools: rinse the tool with water immediately after use.
Precautions: the product is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and varnishes and solvents. Follow the standard precautions when working with paintwork.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.