BACK

Waterproofing "Primer"

ADD
It differs from classical paints and bitumen materials by the absence of an unpleasant odor, short drying time, increased elasticity, heat resistance, and adhesion for all types of building and finishing materials: gypsum, brick, concrete, aerated concrete, chipboard, fiberboard, GKL, LSU, plywood, rolled finishing and roofing materials, wood (except silicone and polyethylene).
It is resistant to the effects of adverse factors such as ultraviolet radiation, low and high temperatures, mechanical abrasion, high humidity, deformation of the substrate, and cracking of the base.
Areas of application – waterproofing in construction, finishing works, painting of roofs, foundations, swimming pools, protection against metal corrosion, repair and prevention of corrosion of car bodies, painting of water transport, moisture protection of wooden structures, noise insulation of sheet roofing metal, finishing for stationary refrigerating chambers.
It is used as an independent coating and as a primer layer.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 150-400 g/m2.
Diluent: Water
Stretchability: Up to 400%
Method of application: Before use, mix thoroughly with a mixer at low speed, while controlling the absence of sediment, if necessary, dilute with water by no more than 10% by volume. Apply by roller, brush or spray in two layers.
Drying time at (20 ± 2) °C and relative humidity (65 ± 5)% from 1 hour (0.5 mm layer) at t = +20 ° C and air humidity 65%.
Tinting: In slightly saturated tones: according to any tinting system as the basis of A.
Wash resistance: The primer forms a coating that is resistant to washing with non-abrasive household detergents (Class 1 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Gloss level: semi-matt
Color: Transparent, Gray, White.
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, surfactant, defoamer, filler, thickener, pigment, antiseptic.

INSTRUCTIONS FOR USE

Painting conditions: The surface to be painted must be free of grease (if necessary), dry, clean, and the temperature of the surface, paint, and air must be at least +8 °C.
Preliminary preparation: Clean the surface from loose old coatings, dirt, rust, grease and dust.
Painting: Apply the paint with a roller, brush or spray in two layers on a plastered new surface made of brick, concrete, aerated concrete, chipboard, fiberboard, GKL, rolled finishing materials and wood. To reinforce cracks and joints, use, for example, a masking bandage.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL HEALTH AND SAFETY: Avoid contact with eyes, rinse with plenty of water, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.