TECHNICAL SPECIFICATIONS
Consumption per 1 layer with a layer thickness of 2 mm 1.6 kg/m2 of the seam surface.
Diluent: Water
Method of application: Mix the sealant thoroughly; apply evenly with a cartouche gun, spatula, trowel or grater into the dust-free seam.
Drying time at (20±2) °C and relative humidity (65±5)% To dust resistance is 1 hour. The final solidification takes 2 days.
Color: White (on request: gray, red-brown, black, green)
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, ground Baikal marble, antiseptic, foaming agent.
INSTRUCTIONS FOR USE
Application conditions: The temperature of the surface, sealant and air must be at least +5 ° C.
Preliminary preparation: The surface must be dry, clean, free of grease and thoroughly cleaned of loose layers of the old coating. It is recommended to pre-treat dusty or loose substrates with a "Concrete dust remover".
Application: Mix the sealant thoroughly; apply evenly with a cartouche gun, spatula, trowel or grater into the dust-free seam. Cut off the excess with a knife after it has completely solidified.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The sealant is fire- and explosion-proof, has no unpleasant odor. Do not mix with other sealants and paint coatings. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.