BACK

Liquid roofing material

ADD
It differs from classical bitumen materials by its increased elasticity, heat resistance, and adhesion to all materials, absence of unpleasant odor and short drying time.
Designed specifically for use under tile adhesive (waterproofing + concrete contact = 2 in 1) - allows you to glue tiles of any size, including when using a underfloor heating system.
It is ideal for the protection of aerated concrete, cinder blocks, sand blocks, bricks and mineral thermal insulation. It can be used under constant load of standing water, including in drinking water tanks and swimming pools.
It does not interfere with the natural breathing of the surface. It dries quickly, has no odor, does not drip, and has antifungal properties.
It is resistant to the effects of adverse factors: ultraviolet radiation, low and high temperatures, high humidity and direct ingress of water, deformation of the substrate, cracking of the substrate, and exposure to aggressive media. Contains filler – ground Baikal marble
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat per single-layer coating is 0.5 - 1 kg/m2.
Diluent: Water
Stretchability: Up to 100%
Method of application: Mix the composition before use. Apply by brush, roller or gun.
Drying time at (20±2) °C and relative humidity (65±5)% To dust resistance is about 1 hour. Before applying the trace. layer – at least 3 hours . The final solidification takes 2 days.
Heat resistance of the coating: -40°C to +90°C
Color: Black, Grey
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, surfactant, defoamer, filler, thickener, pigment, antiseptic.

INSTRUCTIONS FOR USE

Painting conditions: The surface to be painted must be free of grease (if necessary), dry and clean, and the temperature of the surface, paint and air must be at least +8 °C.
Preliminary preparation: Clean the surface from loose old coatings, dirt, rust, grease and dust. Surface defects should be patched with putty. Porous substrates (aerated concrete, cinder blocks, etc.) are recommended to be pre-treated with "Waterproofing Primer"; chalking surfaces with "Strengthening" primer. Mix the composition thoroughly with a mixer at low speed before use. Before applying waterproofing, it is necessary to exclude capillary penetration of moisture into the substrate, cement screeds should contain no more than 2% residual moisture, gypsum screeds — no more than 0.5%, plasters — no more than 1%, and heated bases — no more than 0.3%.
Painting: Apply to the surface with a roller, brush or gun from the side of the intended exposure to moisture or liquid. To achieve the specified waterproofing characteristics, the material should be applied in at least two layers with a consumption of at least 500 g/m2. To reinforce cracks and joints, use, for example, a masking bandage. The finished coating should not be subjected to mechanical influences threatening damage to the waterproofing layer.
Cleaning of tools: Rinse the tool with water immediately after use. The dried material is removed only mechanically.
OCCUPATIONAL HEALTH AND SAFETY: Avoid contact with eyes, rinse with plenty of water, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.