Primer "Concrete contact"

The primer is used for interior and exterior work in the pretreatment of dense, slightly moisture-absorbing substrates (monolithic concrete, concrete blocks, glazed bricks, ceramic tiles, glass, plastic, OSB, GKL, extrusion foam, any surfaces previously painted with glossy enamels and varnishes), before applying gypsum, gypsum-lime, cement and other plasters, putties and tile glue.
The primer is made on the basis of high-quality acrylate latex, which forms a strong elastic film that protects and strengthens the treated surface, prevents shedding and cracking of the surface.
Enhances interlayer adhesion and reduces the consumption of the finish coat by 12-15%. It dries quickly, has no odor, and has antifungal properties.
It is recommended for use in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 200-300 g/m2.
Diluent: Water
Method of application: It is applied by roller or brush.
Drying time at (20±2) °C and relative humidity (65±5)% 1-3 hours before painting, drying time 24 hours before wallpaper.
Color: Turquoise
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
Shelf life: The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, antiseptic, ground marble, defoamer.

INSTRUCTIONS FOR USE

Application conditions: The substrate must be dry and clean, the surface, ground and air temperature must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
Application: Mix thoroughly before use. Apply with a roller or brush in one layer. Control the uniform closure of the surface without gaps.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The soil is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children.
Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.