TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 70-100 g/m2, depending on the absorbency of the substrate.
Method of application: Apply by roller, brush or spray.
Drying time at (20±2)°C and relative humidity (65±5)% 1-3 hours until completely dry. The drying time is 1 hour.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
Shelf life: The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, antiseptic, defoamer.
INSTRUCTIONS FOR USE
Application conditions: the surface to be treated must be dry and clean, the temperature of the surface, soil and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Surface defects should be patched with putty.
Application: Mix thoroughly before use. Apply by roller, brush or spray in a single layer, controlling the uniform wetting of the surface without gaps.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The soil is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.