BACK

The Soil Is Pigmented

ADD
The wallpaper primer ensures the color and texture uniformity of the surface. Increases adhesion and prevents sliding of the material when applying decorative plasters and putties on any base. Increases the strength of loose substrates and regulates the absorbency.
It is used for processing concrete, plastered, plasterboard, brick, wooden surfaces, fiberboard, chipboard, OSB, plastic and EPPS.
It is recommended before pasting any kind of wallpaper, especially before applying liquid wallpaper.
It fills the pores, reduces the consumption of the finishing coat, and is used for painting with any kind of paints. It dries quickly, has no odor, and has antifungal properties.
It is recommended for use in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 150-180 g/m2.
Diluent: Water
Method of application: It is applied by roller or brush.
Drying time at (20±2) °C and relative humidity (65±5)% 1-3 hours before painting, drying time 24 hours before wallpaper.
Color: White
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
Shelf life: The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, antiseptic, ground marble, defoamer.

INSTRUCTIONS FOR USE

Application conditions: The substrate must be dry and clean, the surface, ground and air temperature must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
Application: Mix thoroughly before use. Apply with a roller or brush in one layer. Control the uniform closure of the surface without gaps.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The soil is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children.
Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.