BACK

Primer "Concentrate"

ADD
For exterior and interior work when processing any mineral surfaces before further application of finishing materials. It is used in concentrated and diluted with water: in concentrated form it is used as a waterproofing agent; with dilution with water 1:2 – for objects with high humidity; 1:3 – for exterior work; 1:4 – for interior work.
The soil forms a waterproof, transparent film. It fills the pores, enhances adhesion, improves the quality and reduces the consumption of the finish coating. The high content of biocidal additives ensures reliable protection of the treated surface from mold and fungi. The concentrated formula saves money and space in transportation.
The primer is made on the basis of high-quality acrylate latex. It dries quickly, has no smell, and can be used in residential areas in the presence of people.
It is recommended for use in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 30-300 g/m2, depending on the relief and absorbency of the surface.
Diluent: Water
Method of application: It is applied by roller or brush.
Drying time at (20±2) °C and relative humidity (65±5)% 3 hours
Color: Colorless (white in a canister)
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly by shaking the canister before use.
Shelf life: The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, antiseptic, defoamer.

INSTRUCTIONS FOR USE

Application conditions: The substrate must be dry and clean, the surface, ground and air temperature must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
Application: Mix thoroughly before use. Apply with a roller or brush in one layer. Control the uniform closure of the surface without gaps.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The soil is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children.
Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste.
Do not pour the remaining material into sewers and reservoirs.