TECHNICAL SPECIFICATIONS
Consumption (per 1 coat) 140-250 g/m2, depending on the relief, layer thickness and absorbency of the substrate.
Method of application: Apply with a roller or brush in a thin, even layer.
Applying glue to the wall: apply glue to the wall, attach wallpaper to it and iron it with a rubber roller or plastic spatula.
Applying glue to wallpaper: apply glue evenly to the wallpaper cloth, fold the cloth in half and soak for 10-15 minutes for heavy structural wallpaper to be painted, and 5 minutes for vinyl duplex wallpaper to be soaked.
Drying time: the setting time is 10 minutes. The time to complete drying is 24 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. In case of freezing, defrost in natural conditions without mechanical and thermal effects. After defrosting, mix thoroughly.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: polyvinyl
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, glue and air must be at least +10 ° C, and the relative humidity below 65%.
Pre-treatment: the surface must be dry and clean. Patch up any bumps, cracks, or chips. It is recommended to pre-treat the surface with primer, for example, "Primer Impregnating" TLN Ceramic.
Coloring: mix thoroughly before use. Apply with a roller or brush in a thin, even layer. The maximum effect is achieved only by tightly compressing the surfaces to be bonded. Within 10 minutes after gluing, the glue remains mobile, which makes it possible to adjust the position of the wallpaper.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the product is fire and explosion-proof, has no unpleasant odor. Do not mix with other paints and varnishes and solvents. Follow the standard measures when working with paintwork.
ENVIRONMENTAL PROTECTION: Dispose of empty containers