TECHNICAL SPECIFICATIONS
Consumption (per 1 coat) is 150-250 g/m2, depending on the relief, layer thickness and absorbency of the substrate.
Method of application: Apply with roller or brush.
Drying time: the setting time is 30 minutes. The time to complete drying is 48 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. In case of freezing, defrost in natural conditions without mechanical and thermal effects. After defrosting, mix thoroughly.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: PVA dispersion, water, antiseptic.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, glue and air must be at least +8 ° C, and the relative humidity below 65%. One of the surfaces to be bonded must be vapor-permeable: paper, wood, brick, concrete NOT previously coated with vapor-proof coatings.
Pre-preparation: clean the substrate to a solid surface before use.
Coloring: before use, mix thoroughly with a mixer at low speed, while controlling the absence of sediment. Apply evenly with a brush or roller to one of the surfaces to be bonded. Press the surfaces to be bonded tightly together. The maximum effect is achieved by fixing compressed surfaces until the glue dries completely. When used in building mixes, it is recommended to check the glue for compatibility by adding a small amount of the mixture. In some cases, there is an acceleration of the "setting" process of the mixture.
Cleaning of tools: Rinse the tool with water immediately after