TECHNICAL SPECIFICATIONS
Consumption (per 1 coat) 0.5-2 kg/m2, depending on the relief, layer thickness and absorbency of the substrate.
Method of application: Apply with a spatula, trowel or grater.
Drying time: the setting time is 180 minutes. The time to complete drying is 48 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. In case of freezing, defrost in natural conditions without mechanical and thermal effects. After defrosting, mix thoroughly.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, ground Baikal marble, antiseptic, technological additives.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, glue and air must be at least +8 ° C, and the relative humidity below 65%. One of the surfaces to be bonded must be vapor-permeable: carpet, cardboard, wood, brick, concrete not previously coated with vapor-proof coatings.
Pre-preparation: clean the substrate to a solid surface before use. Eliminate defects with putty. Dust off the surface. For example, a "Dust Remover".
Coloring: Before applying, mix the glue thoroughly with a mixer at low speed, while controlling the absence of sediment. Apply with a spatula, trowel or grater, creating a uniform layer about 1 mm thick; or with a notched trowel no more than 4 mm. For porous coatings (cork, carpet), it should be borne in mind that excess glue can appear on the surface through the pores.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the product is fire and explosion-proof