TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 90-130 g/m2.
Diluent: Water
Method of application: It is applied by roller, brush or spray. For ease of application, it can be diluted with water by no more than 10% of the volume.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat. The specified level of resistance of the coating to washing and mechanical influences is reached after 2 weeks.
Gloss level: Matte
Base: A
Color: Red-brown, Green, Black, White, Gray, Blue.
Tinting: In slightly saturated tones: according to any tinting system as base A (white); independently with universal tinting pastes and water-based color paints.
Wash resistance: The paint forms a coating that is resistant to washing with non-abrasive household detergents (Class 1 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, ground marble, corrosion inhibitor, antiseptic, technological additives.
INSTRUCTIONS FOR USE
Painting conditions: The surface to be painted must be degreased and free of loose paintwork and rust, the surface temperature, paint and air must be at least 5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt, rust, grease and dust.
Coloring: Mix the paint thoroughly before use, if necessary, dilute with water by no more than 10% by volume. Apply the paint with a roller, brush or spray in two or three layers. Check compatibility with copper pipes applied to a hidden section of the pipeline. For guaranteed corrosion protection, providing uniform opacity (without stains and gaps) of the surface with a total consumption of at least 250 g/m2. When calculating the paint consumption, the degree of surface unevenness must be taken into account!
Cleaning of tools: Rinse the tool with water immediately after use.
LABOR PROTECTION: The paint is fire- and explosion-proof, and has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Carry out work in a ventilated area. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.