TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 140-150 g/m2, depending on the relief and absorbency of the surface.
Diluent: Water. The total volume of water and paste color is not more than 5%.
Method of application: Apply the paint by roller, brush or spray in two layers.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry. The specified level of resistance of the coating to washing is reached after 2 weeks.
Wash resistance: the paint forms a coating that is resistant to light wet cleaning using non-abrasive household detergents (class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
The warranty period of storage in the original unopened packaging is 36 months.
Composition: acrylic latex, antiseptic, technological additives, water, environmentally friendly marble.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +8 ° C, and the relative humidity below 80%.
Preliminary preparation: clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty. To obtain a more durable and uniform color coating and reduce paint consumption, it is recommended to prime the surface, for example, with TLN Ceramic Universal primer. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes. The temperature of the surface, paint, and air should not be lower than +5 °C, and humidity should be below 80%.
Application: before use, mix thoroughly with a mixer at low speed, while controlling the absence of sediment, if necessary, dilute with water by no more than 5% by volume. Apply the paint with a roller, brush or spray in two layers.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
Cleaning of tools: Rinse the tool with water immediately after use.
Occupational safety: fire and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
Environmental protection: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.