TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 150-170 g/m2, depending on the relief and absorbency of the surface.
Diluent: Water
Method of application: It is applied by roller, brush or spray. For ease of application, it can be diluted with water by no more than 5% of the volume.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat. The specified level of resistance of the coating to washing is reached after 2 weeks.
Gloss level: Matte
Base: A
Color: White
Tinting: In slightly saturated tones according to any tinting system as a base or independently with universal color pastes and water-based color paints.
Wash resistance: Not washable.
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Transportation is allowed in winter with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic latex, antiseptic, technological additives, water, environmentally friendly marble.
INSTRUCTIONS FOR USE
Painting conditions: The surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
To obtain a more durable and durable coating, reduce paint consumption and ensure that the coating is resistant to washing, it is recommended to prime the surface, for example, with "Interior" primer. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Coloring: Mix the paint thoroughly before use, if necessary, dilute with water by no more than 5% by volume. Apply the paint with a roller, brush or spray in two layers.
Cleaning of tools: Rinse the tool with water immediately after use.
LABOR PROTECTION: The paint is fire- and explosion-proof, and has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.