BACK

The paint is washable

ADD
It is intended for high-quality painting of walls and ceilings inside dry rooms and rooms with high humidity (kitchens, bathrooms, corridors, etc.), outdoors on areas of facades not subject to direct precipitation (loggias, balconies, terraces, under canopies, etc.), on concrete, plastered, plasterboard, brick, wooden surfaces, and also for wallpaper coloring.
The paint is easy to apply, forms a matte vapor-permeable ("breathable") coating that can withstand light wet cleaning. It has increased opacity and is used to change the color of dark bases. It dries quickly, does not change color, has no odor, does not drip, and has antifungal properties.
It is recommended for painting in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 110-150 g/m2
Diluent: Water
Method of application: It is applied by roller, brush or spray. For ease of application, it can be diluted with water by no more than 10% of the volume.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat. The specified level of resistance of the coating to washing is reached after 2 weeks.
Gloss level: Matte
Base: A
Color: White
Tinting: In slightly saturated tones according to any tinting system as a base or independently with universal color pastes and water-based color paints.
Wash resistance: The paint forms a coating that is resistant to light wet cleaning using non-abrasive household detergents (Class 3 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: At a temperature not lower than 5 ° C in a tightly closed container, protecting from moisture, heat and direct sunlight. Transportation is allowed in winter with freezing. Defrost in a warm container

INSTRUCTIONS FOR USE

Painting conditions: The surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least 5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
To obtain a more durable and uniform color coating, reduce paint consumption and ensure the resistance of the coating to washing, it is recommended to prime the surface, for example, with an "Impregnating" primer, and to use a "Moisture protection" primer for rooms with high humidity. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Coloring: Mix the paint thoroughly with a mixer at low speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 10% by volume. Apply the paint with a roller, brush or spray in two layers.
Clearing