BACK

The paint is WASHABLE

ADD
It is intended for high-quality painting of walls and ceilings inside dry rooms and rooms with high humidity (kitchens, bathrooms, corridors, etc.), outdoors on areas of facades not subject to direct precipitation (loggias, balconies, terraces, under canopies, etc.), on concrete, plastered, plasterboard, brick, wooden surfaces, and also for wallpaper coloring. It is easy to apply, forms a matte vapor-permeable ("breathable") coating that can withstand light wet cleaning.
It is recommended for painting in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 130-150 g/m2.
Diluent: Water
Method of application: It is applied by roller, brush or spray. For ease of application, it can be diluted with water by no more than 10% of the volume.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat.
Gloss level: Matte
Color: White
Tinting: In unsaturated tones. Without a guarantee of getting into the color during machine tinting.
Wash resistance: The paint forms a coating that is resistant to light wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: At a temperature not lower than 5 ° C in a tightly closed container, protecting from moisture, heat and direct sunlight.
Transportation is allowed in winter with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic latex, antiseptic, technological additives, water, environmentally friendly marble.

INSTRUCTIONS FOR USE

Painting conditions: The surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty.
To obtain a more durable and uniform color coating, reduce paint consumption and ensure the resistance of the coating to washing, it is recommended to prime the surface, for example, with an "Impregnating" primer, and to use a "Moisture protection" primer for rooms with high humidity.
Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Coloring: Mix the paint thoroughly with a mixer at low speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 10% by volume. Apply the paint with a roller, brush or spray in two layers.
Cleaning of tools: Rinse the tool with water immediately after use.
LABOR PROTECTION: The paint is fire- and explosion-proof, and has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Carry out work in a ventilated area. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.