TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 120-140 g/m2.
Diluent: water, not more than 5% of the total paintwork volume.
Application surface material: curbs, asphalt.
Tinting: coloring with paints and universal water-based pigment pastes.
Method of application: The product can be applied with a roller, brush, spray.
The drying time between 2 coats is at least 3 hours. It takes 48 hours to dry completely.
Composition: acrylic latex, technological additives, water, ground marble, photostabilizer.
INSTRUCTIONS FOR USE
Application conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation and application: Clean the substrate to a solid surface before use. Surface defects should be plastered. Mix the paint thoroughly. Apply by roller, brush or spray.
Storage and transportation: at temperatures from +5 ° C to +35 ° C in tightly sealed containers, protecting from moisture, heat and direct sunlight. In case of freezing, defrost in natural conditions without mechanical and thermal effects. After defrosting, mix thoroughly.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: fire and explosion—proof. Do not mix with other paints and varnishes and solvents. Follow the standard precautions when working with paintwork.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.