TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 130-150 g/m2.
Diluent: Water. The total volume of water and paste color is not more than 5%.
Method of application: Airless, putty coating, pneumatic
Drying time at (20±2)°C and relative humidity (65±5)% At least 3 hours at a temperature of +20 ° C and a relative humidity of 65% before applying the next coat. As the temperature decreases, the drying time increases.
Operating temperature of application: Not lower than +8 °C.
Washability: The paint forms a coating that is resistant to light wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
The warranty period of storage in the original unopened packaging is 36 months.
Composition: Acrylic dispersion, antiseptic, technological additives, water, ground marble.
INSTRUCTIONS FOR USE
Painting conditions: The surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: Clean the substrate to a solid surface before use. Surface defects should be patched with putty. To obtain a more durable and uniform color coating, reduce paint consumption and ensure the resistance of the coating to washing, the surface should be primed, for example, with an "Impregnating" primer, and for rooms with high humidity, use a "Moisture protection" primer. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Application: Mix the paint thoroughly with a mixer at low speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 5% by volume. Apply the paint with a roller, brush or spray in two layers.
Cleaning of tools: Rinse the tool with water immediately after use.
Occupational safety: The paint is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
Environmental protection: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical