TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 120-150 g/m2
Diluent: Water
Method of application: Mix the paint thoroughly. Apply with roller, brush or spray gun.
Drying time at (20±2)°C and relative humidity (65±5)% from 1 hour at a relative humidity of 65% and an air temperature of +20°C. The specified level of resistance of the coating to washing is reached after 2 weeks.
Tinting: manual or machine. In slightly saturated and medium tones according to any tinting system as the basis of A.
Wash resistance: The paint forms a coating that is resistant to wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic latex, increased moisture resistance, broad-spectrum antiseptic, technological additives, water, ground marble.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least 8 ° C, and the relative humidity below 80%.
Preliminary preparation: clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty. To obtain a more durable and durable coating, reduce paint consumption and ensure that the coating is resistant to washing, it is recommended to prime the surface, for example, with TLN Ceramic Facade primer, and to use TLN Ceramic Moisture Protection primer for rooms with high humidity. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Coloring: mix thoroughly before use, if necessary, dilute with water by no more than 10% by volume. Apply the paint with a roller, brush or spray.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the paint is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.