BACK

Facade elastic paint

ADD
It is intended for painting old mineral and wooden facades that are already prone to cracking; new facades and interiors where cracking on the painted surface must be prevented during the construction phase. Inside dry rooms, the paint can be used to coat metal surfaces. It is recommended for painting in residential and office premises, preschool institutions, orphanages, commercial, educational and medical institutions.
Features:resistance to sudden temperature changes, ultraviolet radiation, cracking of the substrate and deformation of the substrate, high vapor permeability and at the same time water resistance. It differs from classical paints by the increased elasticity of the finished coating. It has antifungal properties. It dries quickly, has no smell, and can be used in residential areas in the presence of people. The paint is easy to apply, forms a matte, breathable, long-lasting coating with high water and weather resistance, resistant to frequent washing with approx.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 150-200 g/m2
Diluent: Water
Method of application: Mix the paint thoroughly. Apply with roller, brush or spray gun.
Drying time at (20±2) °C and relative humidity (65±5)% is 1 hour before applying the next coat. The specified level of resistance of the coating to washing is reached after 2 weeks.
Tinting: in slightly saturated tones according to any tinting system as "base A" or independently with universal color pastes and water-based color paints.
Wash resistance: The paint forms a coating that is resistant to wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Surface type: brick, wood, concrete, plastered and other primed porous mineral surfaces, metal (indoors with normal humidity).
Storage and transportation: at a temperature not lower than 5 ° C in a tightly closed container, protecting from moisture, heat and direct sunlight. Transportation is allowed in winter with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic latex, filler, technological additives, antifungal additives, water.

INSTRUCTIONS FOR USE

Painting conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least 5 ° C, and the relative humidity below 80%.
Preliminary preparation: clean the surface from loose old coatings, dirt and dust. Surface defects should be patched with putty. To obtain a more durable and durable coating, reduce paint consumption and ensure that the coating is resistant to washing, it is recommended to prime the surface, for example, with TLN Ceramic Facade primer, and to use TLN Ceramic Moisture Protection primer for rooms with high humidity. Priming is mandatory before application on porous surfaces and surfaces plastered with dry building mixes.
Coloring: mix the paint thoroughly with a mixer at low speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 10% by volume. Apply the paint with a roller, brush or spray in two layers. Rinse the instrument with water immediately after use.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the paint is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.