TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 120-140 g/m2
Diluent: Water
Method of application: Mix the paint thoroughly. Apply the paint with a roller, brush or spray in two layers.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry. The specified level of resistance of the coating to washing is reached after 2 weeks.
Wash resistance: The paint forms a coating that is resistant to wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Storage and transportation: at a temperature not lower than 5 ° C in a tightly closed container, protecting from moisture, heat and direct sunlight. Transportation is allowed in winter with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use, while controlling the absence of sediment.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic latex, antiseptic, technological additives, water.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Surface defects should be patched with putty.
Coloring: mix the paint thoroughly with a mixer at low speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 5% by volume. Apply the paint with a roller, brush or spray in two layers.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the paint is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.