BACK

Varnish for stoves and fireplaces

ADD
For covering brick and plastered elements of fireplaces and stoves exposed to heat not exceeding +95 °C. The test for the possibility of applying varnish to a surface is the absence of boiling water on a heated surface. It is recommended for use in residential and office premises, preschool institutions, orphanages, educational and medical institutions.

Features: The varnish is easy to apply, dries quickly, and has a faint odor. It forms a matte vapor-permeable ("breathable"), crack-resistant coating with long-term use. It is resistant to unstable temperature conditions and frequent heating. Strengthens the stonework, prevents the seams from being washed out. Penetrating deeply into the structure of the base, it does not peel off over time. It is not toxic. It gives the surface water- and dirt-repellent properties.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption (per 1 coat) 120-140 g/m2.
Method of application: Apply by roller, brush or spray.
Drying time: at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry.
Storage and transportation: injure at temperatures from +5°C to +35°C in tightly sealed containers. In case of freezing, the glue should be thawed in natural conditions without mechanical and thermal effects. After defrosting, mix thoroughly.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic latex, antiseptic, technological additives, water.

INSTRUCTIONS FOR USE

Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, varnish and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Surface defects should be patched with putty. Mix the varnish thoroughly before use.
Coloring: mix the varnish thoroughly before use. Apply by roller, brush or spray in two or three layers. The maximum contact with water of the coating that has gained full strength is no more than 6 hours. For ease of application, it can be diluted with water by no more than 10% of the volume.
Cleaning recommendations: resistant to light wet cleaning using non-abrasive household detergents.

Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the varnish is fire— and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.