BACK

The varnish for baths and saunas is heat-resistant

ADD
Designed for decorative finishing and protection of wooden surfaces inside baths and saunas. Not suitable for shelves. It is acceptable to paint the benches in the dressing room. It is suitable for protecting and decorating surfaces made of brick, ceramics, concrete, natural and artificial stone and other mineral surfaces inside washing rooms. DO NOT USE IN STEAM ROOMS.

Properties: forms an elastic, vapor-permeable, breathable coating. Before varnishing the surface, it is recommended to use impregnations as a primer layer, which significantly increases the strength and durability of the coating. It is resistant to unstable temperature conditions and cyclic increase in humidity. Protects wood from cracking and deformation. Prevents darkening of wood. It gives the surface water- and dirt-repellent properties.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption (per 1 coat) is 100-200 g/m2.
Method of application: Apply by roller, brush or spray.
Drying time: at (20±2)°C and relative humidity (65± 5%) drying time between two coats is 1 hour; before complete drying, 1-3 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, antiseptic, defoamer, technological additives.

INSTRUCTIONS FOR USE

Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, varnish and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Surface defects should be patched with putty.
Coloring: mix the varnish thoroughly before use. Apply by roller, brush or spray in two or three layers. Rinse the instrument with water immediately after use.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the varnish is fire— and explosion-proof, has no unpleasant odor. Do not mix with other varnishes, paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.