TECHNICAL SPECIFICATIONS
Consumption (per 1 coat) is 150-200 g/m2.
Method of application: Apply by roller, brush or spray.
Drying time: at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, silicone resins, antiseptic, defoamer.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, varnish and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use.
Coloring: mix the varnish thoroughly before use. Apply by roller, brush or spray.
Cleaning recommendations: resistant to light wet cleaning using non-abrasive household detergents.
Operating conditions: maximum contact with water of the coating that has gained full strength for no more than 6 hours. The minimum time before the start of operation and direct exposure to water is 48 hours.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the varnish is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and varnishes and solvents. Follow the standard measures when working with paintwork.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.