BACK

The varnish is universal for all types of surfaces, glossy

ADD
The varnish is intended for exterior and interior work on stone, brick, concrete, various decorative tiles and other finishing materials.

Properties: it is resistant to mechanical stress and solar radiation. Thermally stable up to 90°C. It is easy to apply, does not drip, does not splash. Dries quickly, has no smell. Creates a decorative transparent coating that highlights the texture of the material. It can be used for protection and decorative treatment of wooden surfaces, decorative plasters and wallpaper. It is tinted with water-based and universal pigment pastes. Do not cover surfaces subject to sediment filling.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption (per 1 coat) is 100-200 g/m2.
Method of application: Apply by roller, brush or spray.
Drying time: at (20±2)°C and relative humidity (65±5)%
1 hour before applying the next coat; 1-3 hours until completely dry.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, antiseptic, defoamer, technological additives.

INSTRUCTIONS FOR USE

Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, varnish and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: before application, clean the substrate to a solid surface, it must be dry, clean, free of grease and thoroughly cleaned of loose layers of the old coating. Defects and irregularities should be leveled using putty. Sand the varnished surface repeatedly. Before applying the varnish, treat the bio-contaminated surface with TLN Ceramic Anti-mold primer.
Coloring: mix the varnish thoroughly before use. Apply by roller, brush or spray in two or three layers.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the varnish is fire— and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children.