TECHNICAL SPECIFICATIONS
Consumption (per 1 coat) is 100-250 g/m2.
Method of application: Apply by roller, brush or spray.
Drying time: at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat; 1-3 hours until completely dry.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: polyurethane dispersion, water, antiseptic, defoamer, technological additives.
INSTRUCTIONS FOR USE
Painting conditions: the surface to be treated must be dry and clean, the temperature of the surface, varnish and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Surface defects should be patched with putty.
Coloring: mix the varnish thoroughly before use. Apply by roller, brush or spray in two or three layers. Rinse the instrument with water immediately after use.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the varnish is fire— and explosion-proof, has no unpleasant odor. Do not mix with other varnishes, paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.