BACK

TLNPRO Top

ADD
TLNPRO Top - Two-component pigmented or transparent rigid polyurethane matt varnish, resistant to light and UV radiation

TLNPRO Top - it is used as a finishing protective layer in epoxy and rigid polyurethane floor coverings, for example TLNPRO

  • It has high abrasion resistance and increases the scratch resistance of coatings.
  • Good chemical resistance to fuels and lubricants, non-concentrated acids, salts and alkalis.
  • Visually hides minor defects in the evenness of the coating and traces of operational wear.
  • It is resistant to light and ultraviolet radiation.
  • It has high technological efficiency.
  • Provides easy cleaning and cleaning of the coating
  • It does not contain volatile organic substances
TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

The density of the mixture at a temperature of +23 ° C

  • is colored 1.14 g/cm3
  • transparent 1.07 g/cm3

The viscosity of the mixture at a temperature of +23 ° C is 550 – 850 MPa · s

Processing time of the composition at a temperature of +20 ° C (10 kg set): ~ 45 minutes

Material consumption per layer is 0.12 – 0.15 kg/m2

Light pedestrian loads:

  • at +12°C 24 hours
  • at +20°C 18 hours
  • at +30°C 12 hours
Full cure at +23 °C for 5 days
Appearance: Matte surface
Interlayer interval at a temperature of +20 °C minimum 12 hours maximum 24 hours
Storage: Store the material in the original packaging of the manufacturer in a dry, enclosed area, at a temperature of +5 to +30 ° C. Storage at a lower temperature can lead to crystallization of the components. Do not expose to direct sunlight.