TECHNICAL SPECIFICATIONS
Consumption per 1 layer is 1.0-1.3 kg/m2 with a layer thickness of 1 mm. The consumption depends on the relief of the base.
Method of application: Apply with a grater, trowel or spatula in a layer of 1-3 mm.
Drying time before the next stage of work: 4-8 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, ground marble, antiseptic, technological additives.
INSTRUCTIONS FOR USE
Application conditions: the surface to be treated must be dry and clean, the temperature of the surface, putty and air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Absorbent and brittle surfaces should be treated, for example, with "Strengthening" TLN Ceramic primer, followed by "Deep penetration" TLN Ceramic. Standard strong surfaces should be primed with "Universal" TLN Ceramic or "Deep Penetration" TLN Ceramic to increase adhesion and eliminate surface compatibility issues.
Cleaning of tools: Rinse the tool with water immediately after use. The dried material is removed only mechanically.
OCCUPATIONAL SAFETY: The composition is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints, impregnations and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.