TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 1-1.2 kg/m2 with a layer thickness of 1 mm. Consumption depends on the terrain
grounds
Method of application: Apply with a grater, trowel or spatula in a layer of 1-3 mm.
The drying time is from 8 to 24 hours, depending on the thickness of the layer, at an air temperature of +20 ° C and a relative humidity of 65%. Subsequent painting is carried out after complete drying, but not earlier than after 8 hours. As the temperature decreases, the drying time increases.
Tinting: tinting in other colors is possible to order on the basis
of the manufacturing plant.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical or thermal effects. After complete defrosting, mix thoroughly before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, water, ground marble, antiseptic,
technological additives.
INSTRUCTIONS FOR USE
Application conditions: the surface to be treated must be dry and clean, the temperature of the surface, the filler paste and the air must be at least +8 ° C, and the relative humidity below 80%.
Pre-preparation: clean the substrate to a solid surface before use. Smooth surfaces (drywall, plastic, chipboard) should be pre-treated with "Pigmented" primer. Absorbent surfaces should be treated, for example, with a "Deep penetration" primer.
Application: mix thoroughly with a mixer at low speed before use. Apply with a grater, trowel or spatula in a layer of 1-3 mm. If necessary, sand the resulting irregularities after the material has completely dried. Apply the second and subsequent layers when the previous layer is completely dry. Priming is not necessary before applying the finishing coat to the "Putty paste Profi".
Cleaning of tools: Rinse the tool with water immediately after use. The dried material is removed only mechanically.
OCCUPATIONAL SAFETY: the product is fire and explosion-proof, has no unpleasant odor. Do not mix with other paints and varnishes and solvents. Follow the standard measures when working with paintwork. Empty containers should be disposed of as household waste. Do not pour the remaining material into sewers and reservoirs.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.