BACK

Marble relief paint

ADD
For high-quality decorative finishing in dry and wet rooms (living rooms, kitchens, bathrooms), as well as in areas under high operational load (offices, halls, corridors). It is recommended for painting in residential and office premises, preschool institutions, orphanages, educational and medical institutions.
Properties: relief paint is practically a durable acrylic plaster with a medium-fine marble filler (0.16 mm), which is characterized by high adhesion and the ability to adjust the viscosity over a wide range by adding water, depending on the tasks of the finisher. Vapor-permeable. Plastic. Creates various decorative effects. Hides surface irregularities. No unpleasant smell.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat (with a layer thickness of 1 mm): 0.3-1.5 kg per 1 m2, depending on the relief being created.
Surface type: can be applied to concrete, plastic, drywall, chipboard.
Method of application: the paint is applied with a roller, sponge, spatula or other tool, depending on the tasks of the designer.
Drying time at (20±2)°C and relative humidity (65± 5%) drying time between two coats is 1 hour; before complete drying, 3 hours.
Storage and transportation: at a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: acrylic dispersion, ground marble, technological additives.

INSTRUCTIONS FOR USE

Application conditions: the surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least +8 ° C, and the relative humidity below 80%.
Wash resistance: the paint forms a coating that is resistant to light wet cleaning using non-abrasive household detergents (Class 2 abrasion resistance according to ISO 11998/ DIN EN 13 300).
Pre-preparation: clean the substrate to a solid surface before use. Smooth surfaces (drywall, plastic, chipboard) should be pre-primed with "Pigmented" TLN Ceramic.
Method of application: the paint is applied with a roller, sponge, spatula or other tool, depending on the tasks of the designer. To obtain a water-resistant coating, as well as to add additional decorative effects, further coating with TLN Ceramic mother-of-pearl paints is recommended. Rinse the instrument with water immediately after use.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: the composition is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints, impregnations and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.