BACK

Fire-resistant impregnation for wood

ADD
Due to the wide color palette, it is used to give the necessary decorative effect to wooden objects.
It converts wood into the category of difficult-to-ignite materials, gives the wood the necessary shade, preserving the texture, does not interfere with the "breathing" of wood, increases mechanical strength and the ability to glue. The biosecurity period is up to 20 years.
The composition easily penetrates wet wood, stops the already started bio-contamination, and provides UV protection. It does not require additional coating with varnishes to protect against atmospheric influences. It forms a translucent coating of the appropriate shade.
It has a balanced viscosity, is easy to apply, does not drip, does not splash. Fire- and explosion-proof material, odorless, dries quickly.
TECHNICAL SPECIFICATIONS
INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATIONS

Consumption per 1 coat is 150-300 g/m2. The total consumption for fire–retardant properties according to GOST 16363 is not 600 g/m2 (1.6-1.7 m2/kg); consumption for biosecurity is less than 300 g/m2 (3.0-3.5 m2/kg).
Diluent: Water
Method of application: It is applied by roller, brush or spray.
Drying time at (20±2)°C and relative humidity (65±5)% 1 hour before applying the next coat.
Tinting: In unsaturated tones. Without a guarantee of getting into color during machine tinting
Wash resistance: Not washable.
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly with a mixer at low speed before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, surfactant, defoamer, filler, thickener, flame retardants, pigment, antiseptic.

INSTRUCTIONS FOR USE

Application conditions: The substrate must be dry and clean, the temperature of the surface, putty and air is not lower than +8 ° C, and the relative humidity is not more than 80%.
Preliminary preparation: Clean the surface from loose old coatings, dirt and dust.
Application: Mix the paint thoroughly with a mixer at high speed before use, while controlling the absence of sediment, if necessary, dilute with water by no more than 10% by volume. Apply by roller, brush or spray in several layers, until the required coating thickness is reached (groups of flame retardant effectiveness).
Cleaning of tools: Rinse the tool with water immediately after use. The dried material is removed only mechanically.
LABOR PROTECTION: The paint is fire- and explosion-proof, and has no unpleasant odor. Do not mix with other paints, impregnations and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.