TECHNICAL SPECIFICATIONS
Consumption: when applying the first layer, 1 liter per 12 m2, the second layer 1 liter per 20 m2. Consumption may vary depending on the type and quality of wood processing.
Application: Mix thoroughly before applying. The surface must be free of dirt and dust. Apply a thin layer using a brush, cloth or sponge. After 30 minutes of application, polish the surface with a waffle cloth.
After 24 hours, apply a second coat in the same way as the first one. Apply in 1-3 layers depending on the type and quality of wood treatment. If necessary, add the "Seven Oils" pigment. When tinting, the first layer is colored, the last is colorless. The tinted oil must be stirred every 10 minutes during application. Clean the instrument with a solution of warm soapy water. Ensure that fresh air is supplied when applying and drying the oil.
Drying time at 70% humidity and +200°CC within 24 hours on release, complete polymerization within three weeks.
Attention! As the temperature decreases, the drying time may increase.
Purpose: it is used to protect wooden surfaces outside and inside the premises. The oil gives the surface hardness, impact resistance, elasticity, and a high level of water resistance. It does not form a film on the surface, the wood remains alive and pleasant to the touch. The coating does not peel off or peel off over time. Vapor-permeable - preserves the ability of wood to "breathe".
Storage and transportation: store in tightly closed containers at temperatures from -20 to +25 °C. Protect from overheating. The shelf life is 3 years.
Ingredients: tung oil.