TECHNICAL SPECIFICATIONS
Consumption per 1 coat is 100-200 g/m2, depending on the degree of preparation of the wood (sawn, planed or sanded).
Diluent: Water
Method of application: It is applied by roller, brush or spray.
Drying time at (20±2)°C and relative humidity (65±5)% 1-3 hours.
Color: Colorless, pine, mountain ash, walnut, teak, light teak, rosewood, wenge, malachite, mahogany, pear, white.
Storage and transportation: At a temperature not lower than +5°C in a tightly sealed container, protecting it from moisture, heat and direct sunlight. Single transportation is allowed during the winter period with freezing. Defrost in a warm room without mechanical impact. After complete defrosting, mix thoroughly by shaking the canister before use.
The warranty period of storage in the original unopened packaging is 3 years.
Composition: Acrylic dispersion, water, antiseptic, defoamer, pigment.
INSTRUCTIONS FOR USE
Application conditions: The surface to be treated must be dry and clean, the surface, impregnation and air temperature must be at least +5 ° C, and the relative humidity below 80%.
Preliminary preparation: Dust-free and dry the surface.
Application: Mix thoroughly before use. Apply with a roller, brush or spray in two or three layers.
Cleaning of tools: Rinse the tool with water immediately after use.
OCCUPATIONAL SAFETY: The impregnation is fire- and explosion-proof, has no unpleasant odor. Do not mix with other paints and solvents. Avoid contact with eyes, rinse with plenty of water in case of contact, keep out of reach of children. Use rubber gloves to protect your hands.
ENVIRONMENTAL PROTECTION: Dispose of empty containers as household waste. Do not pour the remaining material into sewers and reservoirs.