TECHNICAL SPECIFICATIONS
Consumption: 1 liter per 12-16 m2. Consumption may vary depending on the type and quality of wood processing.
Application: Mix thoroughly before applying. The surface must be free of dirt and dust. Apply in 1-2 layers depending on the type and quality of wood treatment. The oil is not tinted. Apply a thin layer using a brush, cloth or sponge. After 30 minutes of application, remove the remaining residue with a clean cloth, wait at least 12 hours and apply a second coat in the same way as the first. After 24 hours, heat the bath without steaming, remove any excess. The sauna can be operated after 48 hours. Clean the instrument with a solution of warm soapy water. Ensure that fresh air is supplied when applying and drying the oil.
Drying time at 70% humidity and a temperature of +200 ° C for 48 hours.
Purpose: it is used for processing wooden surfaces, in rooms with high humidity and in conditions of constant exposure to temperatures (baths, saunas): walls, ceilings, shelves, headrests, etc. It does not form a film on the surface, the wood remains alive and pleasant to the touch. The coating does not peel off or peel off over time. Vapor-permeable - preserves the ability of wood to "breathe".
Storage and transportation: store in a tightly sealed container at a temperature of +5 to +25 °C. Protect from overheating. The shelf life is 5 years.
Composition: a mixture of mineral oils.