TECHNICAL SPECIFICATIONS
Consumption: when applying the first layer, 1 liter per 12 m2, the second layer 1 liter per 20 m2. Consumption may vary depending on the type and quality of wood processing.
Application: Mix thoroughly before applying. The surface must be free of dirt and dust. Apply a thin layer using a brush, cloth or sponge. After 20 minutes of application, polish the surface with a waffle cloth.
Important! Make sure that no oil remains on the surface that has not been absorbed.
After 24 hours, apply a second coat similar to the first one. Apply in 1-3 layers depending on the type and quality of wood treatment. If necessary, add the "Seven Oils" pigment. When tinting, the first layer is colored, the last is colorless. The tinted oil must be stirred every 10 minutes during application. Clean the instrument with a solution of warm soapy water. Ensure that fresh air is supplied when applying and drying the oil.
Drying time at 70% humidity and a temperature of +20 ° C for 12 hours on release, complete drying within three days.
Attention! As the temperature decreases, the drying time may increase.
Purpose: to cover walls and ceilings inside wooden houses. It does not form a film on the surface, the wood remains alive and pleasant to the touch. It contains a natural antiseptic. The coating does not peel off or peel off over time. Vapor-permeable - preserves the ability of wood to "breathe".
Storage and transportation: store in tightly closed containers at temperatures from -20 to +25 °C. Protect from overheating. The shelf life is 3 years.
Ingredients: safflower oil, linseed oil, beeswax, pinene, siccative (lead-free).
SAFETY MEASURES
Use it strictly for its intended purpose! In case of contact with eyes, rinse with plenty of water.
IMPORTANT: used sponges and rags must be stored in an iron container or water, as spontaneous combustion is possible.