Wax with oil

Consumption: when applying the first layer, 1 liter per 12 m2, the second layer 1 liter per 20 m2. Consumption may vary depending on the type and quality of wood processing.

Application: Mix thoroughly before applying. The surface must be free of dirt and dust. Apply a thin layer using a brush, cloth or sponge. After 20 minutes of application, polish the surface with a waffle cloth.
Important! Make sure that no wax remains on the surface that has not been absorbed.
After 24 hours, apply a second coat similar to the first one. Apply in 1-2 layers depending on the type and quality of wood treatment. Clean the instrument with a solution of warm soapy water. Ensure that fresh air is supplied when applying and drying the wax.
Drying time at 70% humidity and a temperature of +20 ° C for 12 hours on release, complete drying within three days.
Attention! As the temperature decreases, the drying time may increase.

Purpose: used to provide additional protection inside wooden houses, baths (except steam rooms) and other wood products. It does not form a film on the surface, the wood remains alive and pleasant to the touch. It contains a natural antiseptic. The coating does not peel off or peel off over time. Vapor-permeable - preserves the ability of wood to "breathe".

Storage and transportation: store in tightly closed containers at temperatures from -20 to +25 °C. Protect from overheating. The shelf life is 3 years.

Ingredients: linseed oil, beeswax, pinene, siccative (lead-free.)

Use it strictly for its intended purpose! In case of contact with eyes, rinse with plenty of water.

IMPORTANT: used sponges and rags must be stored in an iron container or water, as spontaneous combustion is possible.